CognitiveTPG A799II Guia do Utilizador descarregar pdf (Página 24)

Chapter 4: Using the Printer24

A799II Two-Color Thermal Receipt Printer: User Guide A799-2UG0000 Rev. A 09/2013

1 Turn power off to printer.

2 Make sure receipt paper is loaded in the printer before

proceeding. Make sure cover is closed.

3 Apply power to printer and immediately press and hold

the paper feed button until the conguration printout

begins.

• The printer beeps, then prints Diagnostics Form I.

• Press the paper feed button within two seconds to

enter the conguration main menu.

• The printer prints Diagnostics Form II, followed

by the Printer Conguration Menu, and waits for

a main menu selection to be made (see sample

printout on the next page; short clicks are used,

except when answering “yes” or validating

selection).

4 To communicate with the printer, you will press the

paper feed button using either short or long clicks. Use

a long click for “yes” (more than one second) and a

short click for “no.” Follow the printed instructions to

make selections.

5 Continue through your menu selections until you are

asked, “Save New Parameters?” Select “Yes.”

a Reset the Printer.

b Open the receipt cover.

Press and hold the paper feed button while closing

the receipt cover.

• The diagnostic printout veries your new settings.





To enter the conguration mode:

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Sem comentários

CognitiveTPG A799II Guia do Utilizador Página 24