CognitiveTPG A799 Manual de Instruções descarregar pdf (Página 110)

Chapter 4: Programming Commands110

Revision D 12/09

A799-PG00001D

Macros

These commands are used to select and perform a user-dened sequence of printer operations.

Select or cancel macro denition

ASCII GS :

Hexadecimal 1D 3A

Decimal 29 58

Starts or ends macro denition. Macro denition begins when this command is received during normal operation and ends

when this command is received during macro denition. The macro denition is cleared, during denition of the macro

when the execute macro (1D 5E) command is received.

Normal printing occurs while the macro is dened. When the power is turned on the macro is not dened.

The dened contents of the macro are not cleared by the initialize printer (1B 40), thus, the initialize printer (1B 40)

command may be used as part of the macro denition.

If the printer receives a second select or cancel macro denition (1D 3A) command immediately after previously receiving

a select or cancel macro denition (1D 3A) the printer remains in the macro undened state.

Formulas

The contents of the macro can be dened up to 2048 bytes.

Exceptions

If the macro denition exceeds 2048 bytes, excess data is not stored.

Execute macro

ASCII GS ^ r t m

Hexadecimal 1D 5E r t m

Decimal 29 94 r t m

Value of r: The number of times to execute the macro.

Value of t: The waiting time for executing the macro.

Executes a macro. After waiting for a specied period the printer waits for the paper feed button to be pressed. After the

button is pressed, the printer executes the macro once. The printer repeats this operation the number of specied times.

When the macro is executed by pressing the paper feed button (m = 1), paper cannot be fed by using the paper feed button.

Formulas

The waiting time is t x 100 ms for every macro execution.

m species macro executing mode when the LSB (least signicant bit) m = 0

The macro executes r times continuously at the interval specied by t when the LSB (least signicant bit) of m = 1.

Exceptions

If this command is received while a macro is being dened, the macro denition is aborted and the denition is cleared.

If the macro is not dened or if r is 0, nothing is executed.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 141 142

Sem comentários

CognitiveTPG A799 Manual de Instruções Página 110