CognitiveTPG A799 Manual de Instruções descarregar pdf (Página 81)

Chapter 4: Programming Commands 81

Revision D 12/09

A799-PG00001D

Related information

This command is utilized in the TPG LogoEZ

utility. The utility can be used to pre-congure new printers with a default

colorization setup without requiring any application changes. The default setup was designed to provide a general level of

colorization features that would not affect the printer operation. You can expand beyond the default features of the utility

by modifying the application at the host. However, do not attempt to modify the settings within the utility.

f = 1: s = 1H

a = 30H

f = 2: s = 32H

r = 19H

f = 3: s = 1H

r = 7H

t = 1H

f = 4: s = 30H

a = A0H

Convert 6-dots/mm bitmap to 8-dots/mm bitmap

ASCII US EOT n

Hexadecimal 1F 04 n

Decimal 31 04 n

Value: 0 = O

1 = On

(When 0 and 1 are the LSB)

Default: 0 (O)

Selects or cancels 6-dot/mm emulation mode.

When the 6-dot/mm emulation is selected, logos and graphics are expanded horizontally and vertically during download

to emulate their size on a 6-dot/mm printer. The horizontal positioning commands also emulate positioning on a 6-dot/mm

printer.

Enable constant speed logos

ASCII US { n

Hexadecimal 1F 7B n

Decimal 31 123 n

Value: 0 = disable

1 = enable

This command allows the rmware to determine

the optimal speed to print a logo. It is set prior to

downloading the logo and reset after the logo has been downloaded.

In general, “Set max target speed (1D A0 nl nh)” is the preferred command.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 141 142

Sem comentários

CognitiveTPG A799 Manual de Instruções Página 81