CognitiveTPG A798 Manual de Instruções descarregar pdf (Página 35)

Chapter 4: Programming Commands 35

Revision C 12/09

A798-PG00001C

Generate tone

ASCII ESC BEL

Hexadecimal 1B 07

Decimal 27 7

Generates an audible tone. Performed by the printer to signal certain conditions.

Related information

This command is ignored in LEGACY emulation.

Select peripheral device (for multi-drop)

ASCII ESC = n

Hexadecimal 1B 3D n

Decimal 27 61 n

Value of n: 0 (bit 0), device not selected

1 (bit 0), device selected

Default: 1 (bit 0), device selected

Selects the device to which the host computer sends data.

Related information

Other bits of n (1–7) are undened and ignored.

When the printer is disabled by this command, it ignores transmitted data until the printer is re-enabled by the same

command.

Initialize printer

ASCII ESC @

Hexadecimal 1B 40

Decimal 27 64

Default: Character pitch: 15.6 CPI

Column width: 44 characters

Extra dot rows: 3

Character set: Code Page 437

Printing position: Column One

Clears the print line buffer and resets the printer to the default settings for the start-up conguration (refer to Default

settings above).

Single-wide, single-high, non-rotated, and left-aligned characters are set, and user-dened characters or logo graphics are

cleared. (Flash memory is not affected.) Tabs reset to default. Receipt selection state is selected.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 120 121

Sem comentários

CognitiveTPG A798 Manual de Instruções Página 35