CognitiveTPG A798 Manual de Instruções descarregar pdf (Página 38)

Chapter 4: Programming Commands38

Revision C 12/09

A798-PG00001C

Select cut mode and cut paper

ASCII GS V m GS V m n

Hexadecimal 1D 56 m 1D 56 m n

Decimal 29 86 m 29 86 m n

Value of m: Selects the mode as shown in the table.

Value of n: Determines cutting position only if m is 65 or 66.

m Feed and cut mode

0, 48 Full cut (no extra feed)

1, 49 Partial cut (no extra feed)

65 Feeds paper to cutting position + (n times vertical motion unit), and cuts the paper completely

66 Feeds paper to cutting position + (n times vertical motion unit), and performs a partial cut

Range of m: 0, 48; 1, 49

65, 66 (when used with n)

Range of n: 0 – 255

Default of m, n: 0

Selects a mode for cutting paper and cuts the paper. There are two formats for this command, one requiring one parameter

m, the other requiring two parameters m and n. The format is indicated by the parameter m.

Formulas

n times the vertical motion unit is used to determine the cutting position to which the paper is fed.

Print test form

ASCII US t

Hexadecimal 1F 74

Decimal 31 116

Prints the current printer conguration settings on the receipt.

Disabled in page mode.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 120 121

Sem comentários

CognitiveTPG A798 Manual de Instruções Página 38